Skip to main content
Version: 1.X

Authentication

Attention

  • Nacos is an internal micro service component, which needs to run in a trusted internal network. It can not be exposed to the public network environment to prevent security risks.
  • Nacos provides a simple authentication implementation. It is a weak authentication system to prevent business misuse, not a strong authentication system to prevent malicious attacks.
  • If you are running in an untrusted network environment or have strong authentication demands, please refer to the official simple implementation for replacement and enhancement.

Authentication

Use Authentication in Servers​

Without Docker​

By default, no login is required to start following the official document configuration, which can expose the configuration center directly to the outside world. However, if the authentication is enabled, one can use nacos only after he configures the user name and password.

Before enabling authentication, the configuration in application.properties is as follow:

### If turn on auth system:
nacos.core.auth.enabled=false

After enabling authentication, the configuration in application.properties is as follow:

### If turn on auth system:
nacos.core.auth.system.type=nacos
nacos.core.auth.enabled=true

Custom SecretKey​

After enabling authentication, you can customize the key used to generate JWT tokens，the configuration in application.properties is as follow：

Attention：

  1. The secret key provided in the document is a public key. Please replace it with other secret key content during actual deployment to prevent security risks caused by secret key leakage.
  2. After version 2.2.1, the community release version will remove the following value as the default value in the document, which needs to be filled in by yourself, otherwise the node cannot be started.
  3. The secret key needs to be consistent between nodes, and if it is inconsistent for a long time, it may cause 403 invalid token error.
### The default token(Base64 String):
nacos.core.auth.default.token.secret.key=SecretKey012345678901234567890123456789012345678901234567890123456789

When customizing the key, it is recommended to set the configuration item to a Base64 encoded string, and the length of the original key must not be less than 32 characters. For example the following example:

### The default token(Base64 String):
nacos.core.auth.default.token.secret.key=VGhpc0lzTXlDdXN0b21TZWNyZXRLZXkwMTIzNDU2Nzg=

Attention: the authentication switch takes effect immediately after the modification, and there is no need to restart the server.

With Docker​

Official images​

If you choose to use official images, please add the following environment parameter when you start a docker container.

NACOS_AUTH_ENABLE=true

For example, you can run this command to run a docker container with Authentication:

docker run --env PREFER_HOST_MODE=hostname --env MODE=standalone --env NACOS_AUTH_ENABLE=true -p 8848:8848 nacos/nacos-server

Besides, you can also add the other related enviroment parameters:

namedescriptionoption
NACOS_AUTH_ENABLEIf turn on auth systemdefault :false
NACOS_AUTH_TOKEN_EXPIRE_SECONDSThe token expiration in secondsdefault :18000
NACOS_AUTH_TOKENThe default tokendefault :SecretKey012345678901234567890123456789012345678901234567890123456789
NACOS_AUTH_CACHE_ENABLETurn on/off caching of auth information. By turning on this switch, the update of auth information would have a 15 seconds delay.default : false

Custom images​

If you choose to use custom images, please modify the application.properties before you start nacos, change this line 

nacos.core.auth.enabled=false

into

nacos.core.auth.system.type=nacos
nacos.core.auth.enabled=true

Authentication in Clients​

Authentication in Java SDK​

The user name and password should be set when creating a 'Properties' class.

properties.put("username","${username}");
properties.put("password","${password}");

Example Code​

try {
    // Initialize the configuration service, and the console automatically obtains the following parameters through the sample code.
    String serverAddr = "{serverAddr}";
    Properties properties = new Properties();
    properties.put("serverAddr", serverAddr);

    // if need username and password to login
        properties.put("username","nacos");
        properties.put("password","nacos");

    ConfigService configService = NacosFactory.createConfigService(properties);
} catch (NacosException e) {
    // TODO Auto-generated catch block
    e.printStackTrace();
}

Authentication in Other languages SDK​

Pending...

Authentication in Open-API​

Firstly, the user name and password should be provided to login.

curl -X POST '127.0.0.1:8848/nacos/v1/auth/login' -d 'username=nacos&password=nacos'

If the user name and password are correct, the response will be:

{"accessToken":"eyJhbGciOiJIUzI1NiJ9.eyJzdWIiOiJuYWNvcyIsImV4cCI6MTYwNTYyOTE2Nn0.2TogGhhr11_vLEjqKko1HJHUJEmsPuCxkur-CfNojDo","tokenTtl":18000,"globalAdmin":true}

Secondly, when using configuration services or naming services, accessToken in the previous response should be provided. To use the accessToken, 'accessToken=${accessToken}' should be appended at the end of request url, e.g.,

curl -X GET '127.0.0.1:8848/nacos/v1/cs/configs?accessToken=eyJhbGciOiJIUzI1NiJ9.eyJzdWIiOiJuYWNvcyIsImV4cCI6MTYwNTYyMzkyM30.O-s2yWfDSUZ7Svd3Vs7jy9tsfDNHs1SuebJB4KlNY8Q&dataId=nacos.example.1&group=nacos_group'
curl -X POST 'http://127.0.0.1:8848/nacos/v1/ns/instance?accessToken=eyJhbGciOiJIUzI1NiJ9.eyJzdWIiOiJuYWNvcyIsImV4cCI6MTYwNTYyMzkyM30.O-s2yWfDSUZ7Svd3Vs7jy9tsfDNHs1SuebJB4KlNY8Q&port=8848&healthy=true&ip=11.11.11.11&weight=1.0&serviceName=nacos.test.3&encoding=GBK&namespaceId=n1'

Open feature for server identity​

After the authentication feature is enabled, requests between servers will also be affected by the authentication system. Considering that the communication between the servers should be credible, during the 1.2~1.4.0 version, Nacos server use whether the User-Agent includes Nacos-Server to determine whether the request comes from other servers.

However, this implementation is too simple and fixed, leading to possible security issues. Therefore, since version 1.4.1, Nacos has added the server identification feature. Users can configure the identity of the server by themselves, and no longer use User-Agent as the judgment standard for server requests.

Way to open server identity

### Open authentication
nacos.core.auth.enabled=true

### Shutdown user-agent judgement for server request
nacos.core.auth.enable.userAgentAuthWhite=false

### Config the server identity key(not empty) and value(not empty)
nacos.core.auth.server.identity.key=example
nacos.core.auth.server.identity.value=example

Attention All servers in cluster need to be configured with the same server.identity information, otherwise it may cause data inconsistency between servers or failure to delete instances.

Upgrade from old version​

Considering that users of the old version need to upgrade, users can turn on the nacos.core.auth.enable.userAgentAuthWhite=true during upgrading, and turn off it after the cluster is upgraded to 1.4.1 completely and runs stably.